Big ball joints in a metric spindle

  
Item Posts    Sort Order

Big ball joints in a metric spindle

 
campbell3807 campbell3807
New User | Posts: 1 | Joined: 04/17
Posted: 04/14/17
04:58 PM

Hi guys, I run an 86 Monte Carlo Street Stock on a 1/3 mile asphalt.  
I have heard of guys reaming out the stock spindle to use larger ball joints.  My question is, what ball joint is used?  I have been searching online and very seldom can I find any reference to the size of the shaft on a ball joint.  Also, there are two different tapers, 7 and 10 degree (also seen as 1.5 inch per foot and 2 inches per foot) I would need to know which is the correct reamer to do this.

Thanks